Join the Mailing List
Follow DJDeals.net on Twitter!
  •  
Share this page:
ALTO MIXPACK PRO PORTABLE PA SYSTEM

ALTO MIXPACK PRO PORTABLE PA SYSTEM

  • Product Description
  • Product Video
  • Product Accessories
  • Warranty

Alto Professional has announced that MIXPACK and MIXPACK Express, two new portable PA systems, are now shipping. Their all-in-one designs include a central powered mixer with a storage compartment and two loudspeakers. These three components attach to one another to form one pod-like structure with wheels and a handle for easy transport. Loudspeaker cables are also included with both systems, as well as two speaker stands.

MIXPACK offers built-in Alesis DSP effects, six inputs, two Aux sends with stereo returns, RCA input/output, switchable phantom power, three-band EQ on each channel, headphone out, LED meters, 600 watts of power, and a 3-way loudspeaker with a 12-inch cone woofer, four 6.5-inch MF drivers and two 1-inch HF drivers.

MIXPACK Express provides 350 watts of power, up to six channels of audio, seven-band graphic EQ, two-band EQ on each channel, one Aux send/return, RCA input/output, Headphone output, LED meters and built-in effects.

"MIXPACK PA systems are perfect for anyone who wants a sleek, portable system." says Jay Schlabs, executive director of Alto Professional. "They combine everything you need: powerful sound, EQ, quick setup and break down, even built-in effects."

The Alto MIXPACK Pro is the most powerful in the MIXPACK line of portable powered PA systems. A 15" subwoofer and two 6.5" speakers get the sound pumping in seconds behind 1000 watts of pure Class AB power so you're never left wanting more. The satellites lock securely on the back side of MIXPACK Pro and the included handle and wheels make moving the whole rig no problem. Put simply, there has never been a more easy and powerful way to bring this much power to any location.

Alto MIXPACK Pro doesn't stop with professional amplification and speakers. An eight-channel mixer is included so you can connect everything from musical instruments to microphones to an iPod. Four simple screws can be removed allowing the mixer portion to be detached and conveniently placed into your audio rack so you don't have to bend over to make adjustments during a show. Maybe your band is music gigging or you are a live sound engineer or sound contractor looking for something you can set up quickly without sacrificing quality or power, Regardless of where the performance takes you, MIXPACK Pro is easy to set up with all the right connections.  Stands are included and tuck neatly within the cabinet for transport so you can get the sound where it needs to go without any hassle.

Once all your gear is connected to Alto MIXPACK Pro, you can go to work on fine tuning for the venue with MIXPACK Pro's built-in 24-bit digital effects and 7-band graphical EQ. Effects include Hall, Room Vocal & Plate Reverb, Mono & Stereo Delay (max Delay Time 650ms) Chorus, Flanger & Reverb Modulations, Stereo Delay Chorus Rev+Delay and Rev+Chorus combinations. 256 total effects spread across 16 types with 16 variations mean that you are always ready for any room and any performance. 

When you need to get in and out in a hurry with high-power, clarity and flexibility, MIXPACK Pro is the ultimate portable PA choice. Also available are the 600W MIXPACK and 350W Alto MIXPACK Express

TECH INFORMATION

Type: 3-Way Powered System Bi-Amp plus passive crossover into satellite
Low Output Power: 230 Watts RMS Class AB 
MID-HIGH-Output Power: 120 W + 120 Watts RMS Class AB
Peak Power Ratling: 1000 Watts Peak
Maximum SPL @ 1m: 119.5 dB Continuous - 122.5 dB Peak (calculated) 
Frequency Response:  45 Hz - 20 kHz @ -10 dB
Impedance: Low-Mid/High Low 4 Ohm - Mid/high 8 Ohm 
Crossover Frequencies: Active 125 Hz at 12 dB / Oct - Passive 3000 Hz at 12 dB / Oct with Electronic Dynamic Protections
Amplifier Protections: Low-Mid / High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30 Hz - 24 dB / Oct - Limiter / Compressor 
Low Frequency Device: 15" / 385 mm - 2.5" Voice Coil 
Mid Frequency Device: 4 × 6.5" / 165 mm - 1.5" Voice Coil
High Frequency Device: 2 × 1 "Compression Driver - 1" Voice Coil
Horn Coverage: 80 Degrees H × 80 Degrees V
Enclosure: Plastic Reinforced Cabinet Polypropylene

Mixer Section
Microphone Input: Electronically balanced discrete input configuration
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion (THD&N): 0.04% at +4 dBu 1 kHz
Gain: 35 dB
SNR (Signal to noise ratio): ?94 dB
Line input: Electronically balanced 
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion (THD&N): 0.04% at +4 dBu 1 kHz
Gain: 15 dB

Stereo input / Output
Line input: Unbalanced
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion (THD&N): 0.04% at +4 dBu 1 kHz

Impedances 
Microphone Input: 1.4 kOhm
Channel insert retum: 2.5 kOhm
All other inputs: 10 kOhm or greater
Tape out: 1 kOhm
All other outputs: 120 ohm

Equalization
Hi shelving: +/-15 dB @ 12 kHz
Mid bell: +/-15 dB @ 2.5 kHz
Low shelving: +/- 15 dB @ 80 Hz

Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit
Type of effects: Hall, Room, Vocal & Plate Reverbs, Mono & Stereo Delay (max Delay Time 650ms), Chorus, Flanger & Reverb Modulations, Reverbs, Stereo Delay, Chorus, Reverb + Delay and Reverb + Chorus combinations.
Presets: 256
Controls: 16-position preset selector 16-position Variation selector 

Controls & Monitoring 
16-position preset selector
Clip LED
Mute Switch with LED indicator

Main Mix Section
Noise (Bus noise)
Fader 0 dB channels muted:
 -85dB (ref:+4dBu)
Fader 0 dB all input channels assigned and set to unity gain: -81 dBr (ref: +4 dBu)
Max output: 27 dBu balanced
Controls: 22 dBu balanced 1/4" jacks
AUX Sends: Max out 22 dBu
Power Supply: AC - 220 / 240 Volt or AC-100 / 120 Volt, with Switching Power Mode.

Dimensions (WxLxH): 1060mm x 700mm x 700mm
Weight: 111.8 lb

ALTO PROFESSIONAL

Alto warrants its products to be free from defects for 1 year from the date of purchase.

FOR SUPPORT WITH YOUR PRODUCT CONTACT:
401-659-8135